User Tools

Site Tools


Fluxtrol A

Stan Zurek, Fluxtrol A,, {accessed 2020-12-05}


Fluxtrol A - a trade name of high-frequency magnetic material manufactured by Fluxtrol Inc. There is a whole class of materials named Fluxtrol.1)

Fluxtrol A is designed to be used in flux concentrators for induction heating. The manufacturer recommends operating frequency between 1-50 kHz.

Fluxtrol A can be replaced by the improved material Fluxtrol 100.2)

Support us with just $1.00 through PayPal or a credit card:

Flux concentrator (green) made from Fluxtrol A, positioned on a round induction coil 3) fluxtrol_a.jpg Copyright © Fluxtrol Inc.
Typical magnetisation curves for various Fluxtrol materials4)

by S. Zurek, Encyclopedia Magnetica, CC-BY-3.0


Basic parameters of Fluxtrol A 5)
product identification colour green
density +/-2% 6.6 g/cm3 = 6600 kg/m3
initial permeability 63
maximum permeability 120
saturation flux density 1.6 T
operating frequency range 1-50 kHz
major frequency range 3-30 kHz
temperature resistance 250°C (long term), 300°C (short term)
thermal conductivity 0.2 W/(cm∙°C) = 20 W/(m∙K)
resistivity 0.5 kΩ∙cm = 5 Ω∙m

Data sheet

Data sheet for Fluxtrol A

Copyrights © Fluxtrol, Inc.

See also


1) Robert C. Goldstein, Valentin Nemkov and John Jackowski, Virtual Prototyping of Induction Heat Treating, Heat Treating: Proceedings of the 25th ASM Heat Treating Society Conference, September 14–17, 2009, Indianapolis, IN, USA, p. 86
fluxtrol_a.txt · Last modified: 2020/07/19 00:49 by stan_zurek

Privacy and cookie policy (GDPR, etc.)