User Tools

Site Tools


Fluxtrol 100

Stan Zurek, Fluxtrol 100,, {accessed 2020-12-01}


Fluxtrol 100 - a trade name of high-frequency magnetic material manufactured by Fluxtrol Inc. There is a whole class of materials named Fluxtrol.1)

Fluxtrol 100 is designed to be used in flux concentrators for induction heating. The manufacturer recommends operating frequency between 1–30 kHz.

Fluxtrol 100 was created as a substitute of Fluxtrol A, with better parameters like less anisotropy and better thermal conductivity.2)

Support us with just $1.00 through PayPal or a credit card:

Flux concentrator made from Fluxtrol 100, positioned on around induction coils 3) fluxtrol_100.jpg Copyright © Fluxtrol Inc.
Typical magnetisation curves for various Fluxtrol materials4)

by S. Zurek, Encyclopedia Magnetica, CC-BY-3.0


Basic parameters of Fluxtrol 100 5)
density +/-2% 6.8 g/cm³ = 6800 kg/m³
initial permeability 80
maximum permeability 130
saturation flux density 1.7 T
operating frequency range up to 50 kHz
major frequency range 1-30 kHz
temperature resistance 225°C (long term), 300°C (short term)
thermal conductivity 0.23 W/(cm·C) = 23 W/(m·K)
resistivity 12.5 kΩ·cm = 125 Ω·m

Data sheet

Data sheet for Fluxtrol 100

Copyrights © Fluxtrol, Inc.

See also


1) Robert C. Goldstein, Valentin Nemkov and John Jackowski, Virtual Prototyping of Induction Heat Treating, Heat Treating: Proceedings of the 25th ASM Heat Treating Society Conference, September 14–17, 2009, Indianapolis, IN, USA, p. 86
2), 5) {accessed 2015-09-08}
fluxtrol_100.txt · Last modified: 2020/07/19 00:49 by stan_zurek

Privacy and cookie policy (GDPR, etc.)