User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
compliance_voltage [2019/06/03 18:28]
compliance_voltage [2020/12/06 23:07] (current)
Line 1: Line 1:
 +====== Compliance voltage ======
 +|< 100% >|
 +| //[[user/Stan Zurek]], **[[Compliance voltage]]** , [[|]], {accessed @YEAR@-@MONTH@-@DAY@}// |
 +**Compliance voltage** - value of output [[voltage]] which can be generated by a given signal or energy source, whilst still maintaining the required parameters of output specification.[(IEC>[[|IEC 61557-12:2007, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)]])]
 +<box 40% left #f0f0f0>
 +Performance of a 1 A [[current source]] with 2 V **compliance voltage** - the specification of the [[nominal current]] of 1 A can be maintained only up to the compliance voltage
 +The compliance voltage is a parameter useful for instance in real [[current source|current sources]], which have to supply the required current into real load. The required current can be driven only up to a certain voltage level, which is the compliance voltage.[([[|3000 Series, Multi product calibrators, Transmille, {accessed 2016-07-18}]])]
 +Higher compliance voltage is usually desirable, but it would require increasing value of power, for which the internal power supply has to be designed. The same concept of compliance voltage can be also used for some [[current sensor|current sensors]].[(IEC)]
 +<WRAP clear></WRAP>
 +===== See also =====
 +  *[[Current source]]
 +===== References =====
 +{{tag> Compliance_voltage Current_source Counter}}

Privacy and cookie policy (GDPR, etc.)